Next-Gen Hybrid Power

Mobile Hybrid Power Stations

MPMC Mobile Hybrid Power Station is a high-efficiency off-grid solution integrating a Diesel Genset, Solar PV, Lithium Battery Storage, and Smart EMS. Tailored for equipment rental fleets, infrastructure, mining, and project sites, the system utilizes the battery to handle peak and light loads, starting the diesel generator only when needed to power the load and recharge at peak efficiency. This hybrid operation saves up to 80% on fuel, substantially cuts emissions, maintenance costs, and engine runtime, while delivering whisper-quiet power ideal for night construction, events, and residential areas.

Up to 80%
Fuel Consumption Cut
0 ms
Seamless Power Switch
1,000 hrs
Extended Service Cycle
🛡️
IP54 / IP55 Rated

Heavy-Duty All-Weather Enclosure

🇪🇺
CE Certified

EMC & LVD Directive Compliance

🇦🇺
Australia RCM

Electrical Safety Standard Certified

MPMC Mobile Hybrid Power Station in Operation
⚡

Solar-Diesel-Battery

All-in-One Microgrid Station

Proven Efficiency

Why Choose Mobile Hybrid Power Stations?

Traditional generators waste fuel running under light and variable loads. MPMC Hybrid Stations optimize energy dispatch, eliminate engine idling, and slash carbon emissions.

⛽

Massive Fuel Savings

Energy storage handles base and peak loads, allowing the diesel generator to run only at its peak efficiency zone or switch off entirely, saving up to 80% in fuel.

🔇

Silent & Clean Night Ops

Operate in 100% pure battery mode during nighttime, urban construction, or quiet hours. Eliminates noise complaints, localized exhaust emissions, and night-shift disruptions.

⚙️

4x Longer Service Cycles

Drastically reduces engine run-hours and prevents wet-stacking caused by light-load idling. Maintenance intervals extend to over 1,000 hours, cutting OPEX dramatically.

🚀

All-in-One Fast Deployment

Self-contained plug-and-play architecture with integrated solar PV wings, LiFePO4 battery, Tier-3/Stage-V genset, and DSE EMS for rapid field deployment anywhere.

Solar-Diesel-Storage Integration

MPMC GSB Series (Solar + Diesel + Battery)

Engineered with deployable 2,550Wp foldable solar wings, industrial diesel genset, LiFePO4 battery storage, and smart EMS for ultra-clean mobile power.

⚙️ GSB Series Intelligent Operating Logic

Automated multi-source energy prioritization managed by smart DSE Hybrid Controller:

1
Solar & Battery Priority
Solar PV and LiFePO4 storage supply 100% clean, silent energy under light to medium loads.
2
Peak Load Shaving
Battery instantly discharges to handle sudden motor-start spikes without stressing the engine.
3
Optimized Genset Start
Genset auto-starts only when battery hits low SOC, running strictly at optimal 80-90% load.
4
Fast Dual Recharge
Excess generator output and solar power rapidly recharge the battery, then genset shuts off.
Foldable Solar 2550Wp MPMC GSB-20-40 Solar Diesel Hybrid Power Station

GSB-20-40

Solar + Diesel + Battery Hybrid
⚡ Genset: 20 kVA
🔋 Battery: 40.9 kWh
☀️ Solar: 2,550 Wp
  • 2,550Wp integrated hydraulic foldable solar array
  • Ultra-low noise canopy with DSE smart hybrid controller
  • 0ms seamless automatic microgrid power switch
  • Ideal for compact telecom base stations & mobile security
Foldable Solar 2550Wp MPMC GSB-30-60 Solar Diesel Hybrid Power Station

GSB-30-60

Solar + Diesel + Battery Hybrid
⚡ Genset: 30 kVA
🔋 Battery: 61.4 kWh
☀️ Solar: 2,550 Wp
  • 61.4kWh high-safety LiFePO4 liquid-cooled energy storage
  • Heavy-duty IP54 weather-proof soundproof enclosure
  • Smart EMS real-time remote cloud monitoring & telemetry
  • Tailored for construction lighting, night ops & events
Foldable Solar 2550Wp
CE (EMC/LVD) RCM
MPMC GSB-30-90 Solar Diesel Hybrid Power Station

GSB-30-90

Solar + Diesel + Battery Hybrid
⚡ Genset: 30 kVA
🔋 Battery: 91.4 kWh
☀️ Solar: 2,550 Wp
  • 91.4kWh extended capacity LiFePO4 battery pack
  • Full international compliance: EMC, LVD and Australia RCM
  • Up to 90% fuel reduction during night and low-load cycles
  • Perfect for highway construction, urban works & remote camps
Foldable Solar 2550Wp MPMC GSB-40-60 Solar Diesel Hybrid Power Station

GSB-40-60

Solar + Diesel + Battery Hybrid
⚡ Genset: 40 kVA
🔋 Battery: 61.4 kWh
☀️ Solar: 2,550 Wp
  • 40kVA industrial prime diesel engine with electronic governor
  • Heavy crane lifting lugs and forklift pockets for rapid mobility
  • Low-temperature battery thermal management system
  • Engineered for equipment rental fleets & civil engineering
Foldable Solar 2550Wp
CE (EMC/LVD) RCM
MPMC GSB-40-90 Solar Diesel Hybrid Power Station

GSB-40-90

Solar + Diesel + Battery Hybrid
⚡ Genset: 40 kVA
🔋 Battery: 91.4 kWh
☀️ Solar: 2,550 Wp
  • 40kVA genset + 91.4kWh high-capacity LiFePO4 battery
  • Certified to EMC, LVD and Australian RCM electrical standards
  • 0ms seamless UPS-grade power changeover capability
  • Standard fleet choice for mining camps & remote off-grid sites
Foldable Solar 2550Wp
RCM Certified
MPMC GSB-50-90 Solar Diesel Hybrid Power Station

GSB-50-90

Solar + Diesel + Battery Hybrid
⚡ Genset: 50 kVA
🔋 Battery: 91.4 kWh
☀️ Solar: 2,550 Wp
  • 50kVA high-output prime diesel power station
  • Fully compliant with Australian Standard RCM certification
  • Heavy-duty dual-axis towable trailer option available
  • Built for heavy drilling, quarry sites & commercial rentals
Diesel-Storage All-in-One Integration

MPMC GB Series (Diesel + Battery Integrated)

Heavy-duty, container-optimized hybrid stations for unmanned operations, rental fleets, high-power mining, and industrial infrastructure.

⚡ GB Series Intelligent Operating Logic

Smart automated energy management with external solar expansion and quick-connect interfaces:

1
Smart Battery Baseload
Battery handles baseload & overnight quiet periods; diesel genset remains completely shut down.
2
0ms Seamless Shaving
High-rate battery instantly injects surge power during heavy equipment startup, avoiding dips.
3
Peak-Efficiency Dispatch
Genset runs strictly within its 80-90% fuel-efficiency sweet spot, recharging battery simultaneously.
4
External Solar Expansion
Direct plug-and-play ports for 75kWp–300kWp external solar containers to achieve zero fuel cost.
Container Fit: 8 Units / 40'HC
CE (EMC/LVD) RCM
MPMC GB-30-90 Diesel Battery Hybrid Power Station

GB-30-90

Diesel + Battery Integrated Station
⚡ Genset: 30 kVA
🔋 Battery: 91.4 kWh
☀️ Ext. Solar: 75 kWp MPPT
  • 30kVA industrial prime diesel engine + 91.4kWh LiFePO4 battery
  • CE Certified (EMC & LVD Directives) & Australia RCM Certified
  • Standard 125A CEE industrial quick-connect input/output sockets
  • Up to 8 units loaded per 40'HC container for ultra-low logistics cost
  • Engineered for rental fleets, unmanned telecom towers & infrastructure
Heavy Duty / Rental Fleet
CE (EMC/LVD) RCM
MPMC GB-40-90 Diesel Battery Hybrid Power Station

GB-40-90

Diesel + Battery Integrated Station
⚡ Genset: 40 kVA
🔋 Battery: 91.4 kWh
☀️ Ext. Solar: 75 kWp MPPT
  • 40kVA prime power genset paired with 91.4kWh high-density storage
  • Full CE (EMC/LVD) compliance and Australian Standard RCM verified
  • 0ms seamless microgrid power switch with DSE hybrid management
  • 1,000+ hours maintenance intervals, slashing on-site service trips
  • Designed for heavy construction, mining operations & commercial rental
Australian Standard Compliant
RCM Certified
MPMC GB-50-90 Diesel Battery Hybrid Power Station

GB-50-90

Diesel + Battery Integrated Station
⚡ Genset: 50 kVA
🔋 Battery: 91.4 kWh
☀️ Ext. Solar: 75 kWp MPPT
  • 50kVA heavy-duty diesel genset + 91.4kWh LiFePO4 battery system
  • Fully compliant with Australian Standard RCM safety certification
  • High-efficiency MPPT solar charge controller for remote field arrays
  • Robust IP54 heavy-gauge steel enclosure for extreme ambient conditions
  • Ideal for mining camps, regional infrastructure & heavy equipment fleets
Megawatt Heavy-Duty
ISO 8528 / IEC
MPMC GB-150-170 Megawatt-Class Hybrid Power Station

GB-150-170

Megawatt-Class Hybrid Power Station
⚡ Genset: 150 kVA
🔋 Battery: 173 kWh
☀️ Ext. Solar: 300 kWp MPPT
  • 150kVA prime heavy diesel generator + 173kWh liquid-cooled storage
  • High-capacity 300kWp external solar container plug-and-play port
  • Heavy industrial 250A Powerlock quick-connect busbar terminals
  • Multi-unit parallel synchronization capability up to Megawatt scale
  • Built for mega infrastructure projects, deep mining & festival microgrids
Global Track Record

Proven Field Reliability Worldwide

Explore how MPMC Hybrid Power Stations deliver extreme fuel economy, zero-downtime reliability, and whisper-quiet power across 120+ countries and harsh environments.

Spain MPMC Hybrid Power in Spain Solar Project

Spain • Solar Construction & Infrastructure

Deployed on high-irradiance solar farm construction sites. Daytime solar and battery handle baseload and site office HVAC, slashing generator runtime by 82%.

Fuel Saved

82% Saved

Noise Level

< 58 dBA @ 7m

France MPMC Hybrid Power Station in France Urban Project

France • Urban Low-Emission Night Works

Providing whisper-quiet, zero-emission battery power for night-time rail and utility construction under strict European municipal noise regulations.

Night Noise

50 dB Silent Mode

CO2 Reduction

78% Cut

Chile MPMC Hybrid Power in Chile High-Altitude Mining

Chile • High-Altitude Copper Mining Camp

Operating continuously at 4,200m altitude in the Andes. Delivers stable 24/7 power for communication towers, surveillance, and remote worker accommodations.

Operating Alt.

4,200m ASL

Maintenance

1,000 hrs Cycle

Australia MPMC Hybrid Power Station in Australia Mining

Australia • Remote Pilbara Mining & Drill Rig

RCM certified hybrid power stations enduring 50°C ambient desert heat. Seamlessly absorbs heavy inductive motor startup surges with zero voltage sag.

Compliance

RCM Certified

Peak Ambient

50°C Tolerant

Middle East MPMC Hybrid Power in Middle East Oilfield

Middle East • Desert Oilfield & Pipeline Station

Dustproof IP54 heavy-gauge canopy engineered for sandstorm endurance. Integrated MPPT solar chargers maximize abundant desert sunlight for off-grid operations.

Protection

IP54 Heavy Enclosure

Fuel Cut

85% Saved

Global Events MPMC Hybrid Power at Global Major Events

Worldwide • Major Festivals & Sports Events

Supplying zero-flicker UPS-grade clean power for live broadcasting trucks, sound stages, and VIP pavilions with 0ms uninterrupted power changeover.

Switch Time

0 ms Seamless

Emissions

Zero Night Carbon

Next-Gen Hybrid Power

Mobile Hybrid Power Stations

MPMC Mobile Hybrid Power Station is a high-efficiency off-grid solution integrating a Diesel Genset, Solar PV, Lithium Battery Storage, and Smart EMS. Tailored for equipment rental fleets, infrastructure, mining, and project sites, the system utilizes the battery to handle peak and light loads, starting the diesel generator only when needed to power the load and recharge at peak efficiency. This hybrid operation saves up to 80% on fuel, substantially cuts emissions, maintenance costs, and engine runtime, while delivering whisper-quiet power ideal for night construction, events, and residential areas.

Up to 80%
Fuel Consumption Cut
0 ms
Seamless Power Switch
1,000 hrs
Extended Service Cycle
🛡️
IP54 / IP55 Rated

Heavy-Duty All-Weather Enclosure

🇪🇺
CE Certified

EMC & LVD Directive Compliance

🇦🇺
Australia RCM

Electrical Safety Standard Certified

MPMC Mobile Hybrid Power Station in Operation
⚡

Solar-Diesel-Battery

All-in-One Microgrid Station

Proven Efficiency

Why Choose Mobile Hybrid Power Stations?

Traditional generators waste fuel running under light and variable loads. MPMC Hybrid Stations optimize energy dispatch, eliminate engine idling, and slash carbon emissions.

⛽

Massive Fuel Savings

Energy storage handles base and peak loads, allowing the diesel generator to run only at its peak efficiency zone or switch off entirely, saving up to 80% in fuel.

🔇

Silent & Clean Night Ops

Operate in 100% pure battery mode during nighttime, urban construction, or quiet hours. Eliminates noise complaints, localized exhaust emissions, and night-shift disruptions.

⚙️

4x Longer Service Cycles

Drastically reduces engine run-hours and prevents wet-stacking caused by light-load idling. Maintenance intervals extend to over 1,000 hours, cutting OPEX dramatically.

🚀

All-in-One Fast Deployment

Self-contained plug-and-play architecture with integrated solar PV wings, LiFePO4 battery, Tier-3/Stage-V genset, and DSE EMS for rapid field deployment anywhere.

Solar-Diesel-Storage Integration

MPMC GSB Series (Solar + Diesel + Battery)

Engineered with deployable 2,550Wp foldable solar wings, industrial diesel genset, LiFePO4 battery storage, and smart EMS for ultra-clean mobile power.

⚙️ GSB Series Intelligent Operating Logic

Automated multi-source energy prioritization managed by smart DSE Hybrid Controller:

1
Solar & Battery Priority
Solar PV and LiFePO4 storage supply 100% clean, silent energy under light to medium loads.
2
Peak Load Shaving
Battery instantly discharges to handle sudden motor-start spikes without stressing the engine.
3
Optimized Genset Start
Genset auto-starts only when battery hits low SOC, running strictly at optimal 80-90% load.
4
Fast Dual Recharge
Excess generator output and solar power rapidly recharge the battery, then genset shuts off.
Foldable Solar 2550Wp MPMC GSB-20-40 Solar Diesel Hybrid Power Station

GSB-20-40

Solar + Diesel + Battery Hybrid
⚡ Genset: 20 kVA
🔋 Battery: 40.9 kWh
☀️ Solar: 2,550 Wp
  • 2,550Wp integrated hydraulic foldable solar array
  • Ultra-low noise canopy with DSE smart hybrid controller
  • 0ms seamless automatic microgrid power switch
  • Ideal for compact telecom base stations & mobile security
Foldable Solar 2550Wp MPMC GSB-30-60 Solar Diesel Hybrid Power Station

GSB-30-60

Solar + Diesel + Battery Hybrid
⚡ Genset: 30 kVA
🔋 Battery: 61.4 kWh
☀️ Solar: 2,550 Wp
  • 61.4kWh high-safety LiFePO4 liquid-cooled energy storage
  • Heavy-duty IP54 weather-proof soundproof enclosure
  • Smart EMS real-time remote cloud monitoring & telemetry
  • Tailored for construction lighting, night ops & events
Foldable Solar 2550Wp
CE (EMC/LVD) RCM
MPMC GSB-30-90 Solar Diesel Hybrid Power Station

GSB-30-90

Solar + Diesel + Battery Hybrid
⚡ Genset: 30 kVA
🔋 Battery: 91.4 kWh
☀️ Solar: 2,550 Wp
  • 91.4kWh extended capacity LiFePO4 battery pack
  • Full international compliance: EMC, LVD and Australia RCM
  • Up to 90% fuel reduction during night and low-load cycles
  • Perfect for highway construction, urban works & remote camps
Foldable Solar 2550Wp MPMC GSB-40-60 Solar Diesel Hybrid Power Station

GSB-40-60

Solar + Diesel + Battery Hybrid
⚡ Genset: 40 kVA
🔋 Battery: 61.4 kWh
☀️ Solar: 2,550 Wp
  • 40kVA industrial prime diesel engine with electronic governor
  • Heavy crane lifting lugs and forklift pockets for rapid mobility
  • Low-temperature battery thermal management system
  • Engineered for equipment rental fleets & civil engineering
Foldable Solar 2550Wp
CE (EMC/LVD) RCM
MPMC GSB-40-90 Solar Diesel Hybrid Power Station

GSB-40-90

Solar + Diesel + Battery Hybrid
⚡ Genset: 40 kVA
🔋 Battery: 91.4 kWh
☀️ Solar: 2,550 Wp
  • 40kVA genset + 91.4kWh high-capacity LiFePO4 battery
  • Certified to EMC, LVD and Australian RCM electrical standards
  • 0ms seamless UPS-grade power changeover capability
  • Standard fleet choice for mining camps & remote off-grid sites
Foldable Solar 2550Wp
RCM Certified
MPMC GSB-50-90 Solar Diesel Hybrid Power Station

GSB-50-90

Solar + Diesel + Battery Hybrid
⚡ Genset: 50 kVA
🔋 Battery: 91.4 kWh
☀️ Solar: 2,550 Wp
  • 50kVA high-output prime diesel power station
  • Fully compliant with Australian Standard RCM certification
  • Heavy-duty dual-axis towable trailer option available
  • Built for heavy drilling, quarry sites & commercial rentals
Diesel-Storage All-in-One Integration

MPMC GB Series (Diesel + Battery Integrated)

Heavy-duty, container-optimized hybrid stations for unmanned operations, rental fleets, high-power mining, and industrial infrastructure.

⚡ GB Series Intelligent Operating Logic

Smart automated energy management with external solar expansion and quick-connect interfaces:

1
Smart Battery Baseload
Battery handles baseload & overnight quiet periods; diesel genset remains completely shut down.
2
0ms Seamless Shaving
High-rate battery instantly injects surge power during heavy equipment startup, avoiding dips.
3
Peak-Efficiency Dispatch
Genset runs strictly within its 80-90% fuel-efficiency sweet spot, recharging battery simultaneously.
4
External Solar Expansion
Direct plug-and-play ports for 75kWp–300kWp external solar containers to achieve zero fuel cost.
Container Fit: 8 Units / 40'HC
CE (EMC/LVD) RCM
MPMC GB-30-90 Diesel Battery Hybrid Power Station

GB-30-90

Diesel + Battery Integrated Station
⚡ Genset: 30 kVA
🔋 Battery: 91.4 kWh
☀️ Ext. Solar: 75 kWp MPPT
  • 30kVA industrial prime diesel engine + 91.4kWh LiFePO4 battery
  • CE Certified (EMC & LVD Directives) & Australia RCM Certified
  • Standard 125A CEE industrial quick-connect input/output sockets
  • Up to 8 units loaded per 40'HC container for ultra-low logistics cost
  • Engineered for rental fleets, unmanned telecom towers & infrastructure
Heavy Duty / Rental Fleet
CE (EMC/LVD) RCM
MPMC GB-40-90 Diesel Battery Hybrid Power Station

GB-40-90

Diesel + Battery Integrated Station
⚡ Genset: 40 kVA
🔋 Battery: 91.4 kWh
☀️ Ext. Solar: 75 kWp MPPT
  • 40kVA prime power genset paired with 91.4kWh high-density storage
  • Full CE (EMC/LVD) compliance and Australian Standard RCM verified
  • 0ms seamless microgrid power switch with DSE hybrid management
  • 1,000+ hours maintenance intervals, slashing on-site service trips
  • Designed for heavy construction, mining operations & commercial rental
Australian Standard Compliant
RCM Certified
MPMC GB-50-90 Diesel Battery Hybrid Power Station

GB-50-90

Diesel + Battery Integrated Station
⚡ Genset: 50 kVA
🔋 Battery: 91.4 kWh
☀️ Ext. Solar: 75 kWp MPPT
  • 50kVA heavy-duty diesel genset + 91.4kWh LiFePO4 battery system
  • Fully compliant with Australian Standard RCM safety certification
  • High-efficiency MPPT solar charge controller for remote field arrays
  • Robust IP54 heavy-gauge steel enclosure for extreme ambient conditions
  • Ideal for mining camps, regional infrastructure & heavy equipment fleets
Megawatt Heavy-Duty
ISO 8528 / IEC
MPMC GB-150-170 Megawatt-Class Hybrid Power Station

GB-150-170

Megawatt-Class Hybrid Power Station
⚡ Genset: 150 kVA
🔋 Battery: 173 kWh
☀️ Ext. Solar: 300 kWp MPPT
  • 150kVA prime heavy diesel generator + 173kWh liquid-cooled storage
  • High-capacity 300kWp external solar container plug-and-play port
  • Heavy industrial 250A Powerlock quick-connect busbar terminals
  • Multi-unit parallel synchronization capability up to Megawatt scale
  • Built for mega infrastructure projects, deep mining & festival microgrids
Global Track Record

Proven Field Reliability Worldwide

Explore how MPMC Hybrid Power Stations deliver extreme fuel economy, zero-downtime reliability, and whisper-quiet power across 120+ countries and harsh environments.

Spain MPMC Hybrid Power in Spain Solar Project

Spain • Solar Construction & Infrastructure

Deployed on high-irradiance solar farm construction sites. Daytime solar and battery handle baseload and site office HVAC, slashing generator runtime by 82%.

Fuel Saved

82% Saved

Noise Level

< 58 dBA @ 7m

France MPMC Hybrid Power Station in France Urban Project

France • Urban Low-Emission Night Works

Providing whisper-quiet, zero-emission battery power for night-time rail and utility construction under strict European municipal noise regulations.

Night Noise

0 dB Silent Mode

CO2 Reduction

78% Cut

Chile MPMC Hybrid Power in Chile High-Altitude Mining

Chile • High-Altitude Copper Mining Camp

Operating continuously at 4,200m altitude in the Andes. Delivers stable 24/7 power for communication towers, surveillance, and remote worker accommodations.

Operating Alt.

4,200m ASL

Maintenance

1,000 hrs Cycle

Australia MPMC Hybrid Power Station in Australia Mining

Australia • Remote Pilbara Mining & Drill Rig

RCM certified hybrid power stations enduring 50°C ambient desert heat. Seamlessly absorbs heavy inductive motor startup surges with zero voltage sag.

Compliance

RCM Certified

Peak Ambient

50°C Tolerant

Middle East MPMC Hybrid Power in Middle East Oilfield

Middle East • Desert Oilfield & Pipeline Station

Dustproof IP54 heavy-gauge canopy engineered for sandstorm endurance. Integrated MPPT solar chargers maximize abundant desert sunlight for off-grid operations.

Protection

IP54 Heavy Enclosure

Fuel Cut

85% Saved

Global Events MPMC Hybrid Power at Global Major Events

Worldwide • Major Festivals & Sports Events

Supplying zero-flicker UPS-grade clean power for live broadcasting trucks, sound stages, and VIP pavilions with 0ms uninterrupted power changeover.

Switch Time

0 ms Seamless

Emissions

Zero Night Carbon

Next-Gen Hybrid Power

Mobile Hybrid Power Stations

MPMC Mobile Hybrid Power Station is a high-efficiency off-grid solution integrating a Diesel Genset, Solar PV, Lithium Battery Storage, and Smart EMS. Tailored for equipment rental fleets, infrastructure, mining, and project sites, the system utilizes the battery to handle peak and light loads, starting the diesel generator only when needed to power the load and recharge at peak efficiency. This hybrid operation saves up to 90% on fuel, substantially cuts emissions, maintenance costs, and engine runtime, while delivering whisper-quiet power ideal for night construction, events, and residential areas.

Up to 90%
Fuel Consumption Cut
0 ms
Seamless Power Switch
1,000 hrs
Extended Service Cycle
🛡️
IP54 / IP55 Rated

Heavy-Duty All-Weather Enclosure

🇪🇺
CE Certified

EMC & LVD Directive Compliance

🇦🇺
Australia RCM

Electrical Safety Standard Certified

MPMC Mobile Hybrid Power Station in Operation
⚡

Solar-Diesel-Battery

All-in-One Microgrid Station

Proven Efficiency

Why Choose Mobile Hybrid Power Stations?

Traditional generators waste fuel running under light and variable loads. MPMC Hybrid Stations optimize energy dispatch, eliminate engine idling, and slash carbon emissions.

⛽

Massive Fuel Savings

Energy storage handles base and peak loads, allowing the diesel generator to run only at its peak efficiency zone or switch off entirely, saving up to 90% in fuel.

🔇

Silent & Clean Night Ops

Operate in 100% pure battery mode during nighttime, urban construction, or quiet hours. Eliminates noise complaints, localized exhaust emissions, and night-shift disruptions.

⚙️

4x Longer Service Cycles

Drastically reduces engine run-hours and prevents wet-stacking caused by light-load idling. Maintenance intervals extend to over 1,000 hours, cutting OPEX dramatically.

🚀

All-in-One Fast Deployment

Self-contained plug-and-play architecture with integrated solar PV wings, LiFePO4 battery, Tier-3/Stage-V genset, and DSE EMS for rapid field deployment anywhere.

Solar-Diesel-Storage Integration

MPMC GSB Series (Solar + Diesel + Battery)

Engineered with deployable 2,550Wp foldable solar wings, industrial diesel genset, LiFePO4 battery storage, and smart EMS for ultra-clean mobile power.

⚙️ GSB Series Intelligent Operating Logic

Automated multi-source energy prioritization managed by smart DSE Hybrid Controller:

1
Solar & Battery Priority
Solar PV and LiFePO4 storage supply 100% clean, silent energy under light to medium loads.
2
Peak Load Shaving
Battery instantly discharges to handle sudden motor-start spikes without stressing the engine.
3
Optimized Genset Start
Genset auto-starts only when battery hits low SOC, running strictly at optimal 80-90% load.
4
Fast Dual Recharge
Excess generator output and solar power rapidly recharge the battery, then genset shuts off.
Foldable Solar 2550Wp MPMC GSB-20-40 Solar Diesel Hybrid Power Station

GSB-20-40

Solar + Diesel + Battery Hybrid
⚡ Genset: 20 kVA
🔋 Battery: 40.9 kWh
☀️ Solar: 2,550 Wp
  • 2,550Wp integrated hydraulic foldable solar array
  • Ultra-low noise canopy with DSE smart hybrid controller
  • 0ms seamless automatic microgrid power switch
  • Ideal for compact telecom base stations & mobile security
Foldable Solar 2550Wp MPMC GSB-30-60 Solar Diesel Hybrid Power Station

GSB-30-60

Solar + Diesel + Battery Hybrid
⚡ Genset: 30 kVA
🔋 Battery: 61.4 kWh
☀️ Solar: 2,550 Wp
  • 61.4kWh high-safety LiFePO4 liquid-cooled energy storage
  • Heavy-duty IP54 weather-proof soundproof enclosure
  • Smart EMS real-time remote cloud monitoring & telemetry
  • Tailored for construction lighting, night ops & events
Foldable Solar 2550Wp
CE (EMC/LVD) RCM
MPMC GSB-30-90 Solar Diesel Hybrid Power Station

GSB-30-90

Solar + Diesel + Battery Hybrid
⚡ Genset: 30 kVA
🔋 Battery: 91.4 kWh
☀️ Solar: 2,550 Wp
  • 91.4kWh extended capacity LiFePO4 battery pack
  • Full international compliance: EMC, LVD and Australia RCM
  • Up to 90% fuel reduction during night and low-load cycles
  • Perfect for highway construction, urban works & remote camps
Foldable Solar 2550Wp MPMC GSB-40-60 Solar Diesel Hybrid Power Station

GSB-40-60

Solar + Diesel + Battery Hybrid
⚡ Genset: 40 kVA
🔋 Battery: 61.4 kWh
☀️ Solar: 2,550 Wp
  • 40kVA industrial prime diesel engine with electronic governor
  • Heavy crane lifting lugs and forklift pockets for rapid mobility
  • Low-temperature battery thermal management system
  • Engineered for equipment rental fleets & civil engineering
Foldable Solar 2550Wp
CE (EMC/LVD) RCM
MPMC GSB-40-90 Solar Diesel Hybrid Power Station

GSB-40-90

Solar + Diesel + Battery Hybrid
⚡ Genset: 40 kVA
🔋 Battery: 91.4 kWh
☀️ Solar: 2,550 Wp
  • 40kVA genset + 91.4kWh high-capacity LiFePO4 battery
  • Certified to EMC, LVD and Australian RCM electrical standards
  • 0ms seamless UPS-grade power changeover capability
  • Standard fleet choice for mining camps & remote off-grid sites
Foldable Solar 2550Wp
RCM Certified
MPMC GSB-50-90 Solar Diesel Hybrid Power Station

GSB-50-90

Solar + Diesel + Battery Hybrid
⚡ Genset: 50 kVA
🔋 Battery: 91.4 kWh
☀️ Solar: 2,550 Wp
  • 50kVA high-output prime diesel power station
  • Fully compliant with Australian Standard RCM certification
  • Heavy-duty dual-axis towable trailer option available
  • Built for heavy drilling, quarry sites & commercial rentals
Diesel-Storage All-in-One Integration

MPMC GB Series (Diesel + Battery Integrated)

Heavy-duty, container-optimized hybrid stations for unmanned operations, rental fleets, high-power mining, and industrial infrastructure.

⚡ GB Series Intelligent Operating Logic

Smart automated energy management with external solar expansion and quick-connect interfaces:

1
Smart Battery Baseload
Battery handles baseload & overnight quiet periods; diesel genset remains completely shut down.
2
0ms Seamless Shaving
High-rate battery instantly injects surge power during heavy equipment startup, avoiding dips.
3
Peak-Efficiency Dispatch
Genset runs strictly within its 80-90% fuel-efficiency sweet spot, recharging battery simultaneously.
4
External Solar Expansion
Direct plug-and-play ports for 75kWp–300kWp external solar containers to achieve zero fuel cost.
Container Fit: 8 Units / 40'HC
CE (EMC/LVD) RCM
MPMC GB-30-90 Diesel Battery Hybrid Power Station

GB-30-90

Diesel + Battery Integrated Station
⚡ Genset: 30 kVA
🔋 Battery: 91.4 kWh
☀️ Ext. Solar: 75 kWp MPPT
  • 30kVA industrial prime diesel engine + 91.4kWh LiFePO4 battery
  • CE Certified (EMC & LVD Directives) & Australia RCM Certified
  • Standard 125A CEE industrial quick-connect input/output sockets
  • Up to 8 units loaded per 40'HC container for ultra-low logistics cost
  • Engineered for rental fleets, unmanned telecom towers & infrastructure
Heavy Duty / Rental Fleet
CE (EMC/LVD) RCM
MPMC GB-40-90 Diesel Battery Hybrid Power Station

GB-40-90

Diesel + Battery Integrated Station
⚡ Genset: 40 kVA
🔋 Battery: 91.4 kWh
☀️ Ext. Solar: 75 kWp MPPT
  • 40kVA prime power genset paired with 91.4kWh high-density storage
  • Full CE (EMC/LVD) compliance and Australian Standard RCM verified
  • 0ms seamless microgrid power switch with DSE hybrid management
  • 1,000+ hours maintenance intervals, slashing on-site service trips
  • Designed for heavy construction, mining operations & commercial rental
Australian Standard Compliant
RCM Certified
MPMC GB-50-90 Diesel Battery Hybrid Power Station

GB-50-90

Diesel + Battery Integrated Station
⚡ Genset: 50 kVA
🔋 Battery: 91.4 kWh
☀️ Ext. Solar: 75 kWp MPPT
  • 50kVA heavy-duty diesel genset + 91.4kWh LiFePO4 battery system
  • Fully compliant with Australian Standard RCM safety certification
  • High-efficiency MPPT solar charge controller for remote field arrays
  • Robust IP54 heavy-gauge steel enclosure for extreme ambient conditions
  • Ideal for mining camps, regional infrastructure & heavy equipment fleets
Megawatt Heavy-Duty
ISO 8528 / IEC
MPMC GB-150-170 Megawatt-Class Hybrid Power Station

GB-150-170

Megawatt-Class Hybrid Power Station
⚡ Genset: 150 kVA
🔋 Battery: 173 kWh
☀️ Ext. Solar: 300 kWp MPPT
  • 150kVA prime heavy diesel generator + 173kWh liquid-cooled storage
  • High-capacity 300kWp external solar container plug-and-play port
  • Heavy industrial 250A Powerlock quick-connect busbar terminals
  • Multi-unit parallel synchronization capability up to Megawatt scale
  • Built for mega infrastructure projects, deep mining & festival microgrids
Global Track Record

Proven Field Reliability Worldwide

Explore how MPMC Hybrid Power Stations deliver extreme fuel economy, zero-downtime reliability, and whisper-quiet power across 120+ countries and harsh environments.

Spain MPMC Hybrid Power in Spain Solar Project

Spain • Solar Construction & Infrastructure

Deployed on high-irradiance solar farm construction sites. Daytime solar and battery handle baseload and site office HVAC, slashing generator runtime by 82%.

Fuel Saved

82% Saved

Noise Level

< 58 dBA @ 7m

France MPMC Hybrid Power Station in France Urban Project

France • Urban Low-Emission Night Works

Providing whisper-quiet, zero-emission battery power for night-time rail and utility construction under strict European municipal noise regulations.

Night Noise

0 dB Silent Mode

CO2 Reduction

78% Cut

Chile MPMC Hybrid Power in Chile High-Altitude Mining

Chile • High-Altitude Copper Mining Camp

Operating continuously at 4,200m altitude in the Andes. Delivers stable 24/7 power for communication towers, surveillance, and remote worker accommodations.

Operating Alt.

4,200m ASL

Maintenance

1,000 hrs Cycle

Australia MPMC Hybrid Power Station in Australia Mining

Australia • Remote Pilbara Mining & Drill Rig

RCM certified hybrid power stations enduring 50°C ambient desert heat. Seamlessly absorbs heavy inductive motor startup surges with zero voltage sag.

Compliance

RCM Certified

Peak Ambient

50°C Tolerant

Middle East MPMC Hybrid Power in Middle East Oilfield

Middle East • Desert Oilfield & Pipeline Station

Dustproof IP54 heavy-gauge canopy engineered for sandstorm endurance. Integrated MPPT solar chargers maximize abundant desert sunlight for off-grid operations.

Protection

IP54 Heavy Enclosure

Fuel Cut

80% Saved

Global Events MPMC Hybrid Power at Global Major Events

Worldwide • Major Festivals & Sports Events

Supplying zero-flicker UPS-grade clean power for live broadcasting trucks, sound stages, and VIP pavilions with 0ms uninterrupted power changeover.

Switch Time

0 ms Seamless

Emissions

Zero Night Carbon

HBD-R Series Mobile & Rental BESS | MPMC
⚡ Mobile BESS · Genset Hybrid · 1C High Discharge

HBD-R Series Mobile Energy Storage

MPMC HBD-R Series Mobile Energy Storage is an all-in-one mobile power solution tailored for construction sites and power rental industries. Featuring air and liquid cooling systems, long-cycle lithium batteries, ultra-quiet operation and zero emissions, it supports hybrid parallel operation with grid power, solar PV systems and diesel generators. With plug-and-play deployment and scalable multi-unit parallel expansion, the system is widely used for construction projects, power rental services and off-grid field operations. It effectively cuts operational costs, improves power efficiency and meets environmental compliance requirements, delivering a reliable high-power green temporary power solution.

Genset Mate: HBD-R Mobile  BESS

Seamlessly pairs with diesel generators to eliminate low-load wet stacking, slashing fuel burn by up to 60% while delivering instant 1C high-torque peak power. Engineered for rental fleets, heavy construction, and demanding off-grid jobsites, the HBD-R Series transforms traditional diesel power into clean, ultra-efficient hybrid microgrids with plug-and-play ease.

1C Fast Discharge
HBD-200kW-203kWh Mobile BESS

HBD-200kW-200kWh

1C Liquid Cooled Mobile BESS
Rated Power200 kW (1C)
Energy Capacity203.5 kWh
Cooling SystemLiquid Cooled (LCAC)
Genset Interface1× Powerlock 400A
AC Out Sockets630A Powerlock + CEE Sockets
Shipping Load8 units / 40'GP (3.0t)
LEARN MORE
High Capacity
HBD-250kW-450kWh Mobile BESS

HBD-250kW-400kWh

Long-Duration Mobile BESS
Rated Power250 kW
Energy Capacity450.2 kWh
Cooling SystemIndustrial HVAC
Genset Interface1× Powerlock 800A
AC Out Sockets1× Powerlock 800A
Shipping Load4 units / 40'GP (7.6t)
LEARN MORE
1C Mega Power
HBD-400kW-407kWh Mobile BESS

HBD-400kW-400kWh

1C Liquid Cooled Hybrid BESS
Rated Power400 kW (1C)
Energy Capacity407.0 kWh
Cooling SystemLiquid Cooled (LCAC)
Genset Interface1× Powerlock 630A
AC Out Sockets2× 630A Powerlock + CEE
Shipping Load4 units / 40'GP (6.2t)
LEARN MORE
Tower Crane Edition
HBD-400kW-407kWh For Tower Crane

HBD-400kW-400kWh Tower Crane

Heavy Inrush Crane Master
Rated Power400 kW (1C High Torque)
Energy Capacity407.0 kWh
Cooling SystemLiquid Cooled (LCAC)
Heavy Output1000A Busbar 3P+N
Inrush AbsorptionMotor & Crane Soft-Buffer
ComplianceRCM / EMC / LVD (6.2t)
LEARN MORE

CORE COMPETENCIES

Engineered for Maximum Efficiency, Mobility & Rental Performance

⚡
High Discharge Power1C Rate Peak Performance

True 1C high-rate discharge capability delivers instant surge power to absorb massive inrush starting currents from tower cranes, crushers, heavy pumps, and electric motors without voltage sag.

🔄
Genset OptimizationSmart Hybrid Microgrid

Dedicated Genset Powerlock input and smart EMS coordination eliminate diesel generator low-load wet stacking, slashing fuel burn by 30%–60% and extending engine overhaul intervals.

🚛
Rapid DeploymentForklift & Crane Mobility

Integrated heavy-duty skid chassis with forklift pockets and certified lifting lugs. Plug-and-play Powerlock & CEE sockets enable 1-hour fast on-site commissioning with zero civil construction.

📦
Logistics EfficiencyHigh Container Loading

Optimized modular dimensions allow up to 8 units per 40'GP container (HBD-200), dramatically lowering international and domestic transport costs per delivered kWh for rental fleets.

🛡️
Extreme SafetyLiquid Cooling & Dual Fire Safety

Automotive-grade LFP cells with LCAC liquid thermal management ensure uniform cell temperature. Protected by Aerosol fire suppression, off-gas detection, and 24/7 cloud telematics.

MARKET & SECTOR SOLUTIONS

Empowering Rental Companies, Heavy Construction, and Demanding Off-Grid Sites

Rental Fleet OperatorsMaximized Rental Yield & Fleet ROI

  • Premium Green Rental Rates Command top-tier rental rates by helping end-clients achieve Zero-Carbon and Low-Emission ESG compliance.
  • Minimized Logistics & Turnaround Cost High container loading density and fast plug-and-play deployment reduce mobilization and freight costs.
  • Zero Engine Maintenance No oil changes, engine rebuilds, or fuel delivery logistics—significantly lowering maintenance overhead vs traditional gen-sets.
  • Intelligent Fleet Telematics Built-in 4G/5G cloud telemetry with GPS mapping enables real-time SoC tracking, billing automation, and preventive health alerts.

Construction & InfrastructureTower Cranes & Urban Zero-Noise Power

  • 1000A Busbar for Tower Cranes Dedicated high-amperage output cushions heavy dynamic hoisting loads and electric excavators with instant surge power.
  • 24/7 Silent Urban Operations Ultra-low noise (<50 dB) allows round-the-clock construction in strict residential and noise-controlled city zones.
  • 30%–60% Fuel Reduction Hybrid pairing allows downsizing primary generators from 500kVA to 150kVA, drastically reducing site fuel bills.
  • Fast Site Re-allocation Skid and trailer mobility keeps pace with evolving construction phases with zero permanent ground foundation work.

Mining, Oil & GasHarsh Environment Microgrid Stabilization

  • Microgrid Voltage & Frequency Anchor Acts as an instant spinning reserve to stabilize off-grid islanded networks during high-torque pump cycling.
  • Rugged All-Weather Reliability Operates reliably from -20℃ to +50℃ with IP54/IP55 enclosure and C4/C5 heavy industrial anti-corrosion protection.
  • Seamless Multi-Source Input Simultaneous AC coupling for Solar PV, diesel/gas gensets, and weak grid connection.

Events & Critical BackupZero-Fume Silent Temporary Power

  • Pure Sine Wave Quality Studio-grade power stability protects sensitive broadcasting, audio/lighting, and precision testing equipment.
  • Zero Local Emissions Eliminates toxic exhaust fumes in outdoor festivals, film sets, VIP exhibitions, and enclosed arenas.
  • Instant Uninterrupted Transition Seamless on-grid/off-grid transfer ensures continuous operation during sudden utility blackouts.

OUR PROJECTS

Proven Reliability in Global Power Operations

Columbia Music Festival
Columbia Music Festival

Silent power supply for large-scale outdoor events, replacing noisy generators.

Netherlands Hybrid Project
Netherlands Hybrid System

Seamless integration of BESS with diesel gensets for maximum fuel efficiency.

Belgium Construction Site
Belgium Construction Site

Zero-emission mobile power for urban infrastructure and electric excavators.

UAE Oil & Gas Exploration
UAE Oil & Gas Exploration

Extreme C5 corrosion protection for harsh desert and high-salinity environments.

Australian Rental Company
Australian Rental Fleet

High-ROI rental solutions for 24/7 off-grid power infrastructure.

UK Energy Utility Project
UK Energy Utility Project

Grid-connected backup and peak demand management for industrial data centers.

GLOBAL ACCESS CERTIFIED

Engineered to Meet Strict International Grid & Safety Regulations

Grid-tied & Interconnection Standards
EN 50549-1/-2 AS/NZS 4777.2 VDE-AR-N 4105 G99 / G100 (UK) IEEE 1547 RCM (Australia)
Safety, Battery & EMC Standards
CE Compliance LVD (EN 62477-1) EMC (EN 61000-6-2/-4) IEC 62619 (LFP Safety) UN 38.3 (Transport) IP54 / IP55 Enclosure
BCH Series | MPMC Mobile & Fixed BESS Charger
ALL-IN-ONE MOBILE & FIXED BESS CHARGER

MPMC BCH Series BESS Charger

The MPMC BCH Series BESS Charger (Battery Energy Storage & EV Charger) is a next-generation, fully integrated, ultra-safe, and plug-and-play green energy replenishment system engineered for global electric heavy-duty trucks, construction machinery, commercial buses, and specialized utility vehicles.

The BCH Series deeply integrates 200 kWh to 1,000 kWh (203.5 kWh – 1,075 kWh) lithium iron phosphate (LiFePO4) energy storage systems, 150 kW to 600 kW high-power DC ultra-fast charging modules, intelligent microgrid Energy Management Systems (EMS), and industrial-grade high-reliability protective enclosures (available with mobile trailer chassis or fixed containerized formats).

Comprising two core product matrices — Mobile and Fixed/Hybrid — the BCH Series delivers key capabilities including peak shaving, high-power DC fast charging, multi-standard AC emergency power supply, and multi-energy hybridization (Grid / Diesel Genset / Solar PV). Featuring a truly plug-and-play design with zero complex civil construction and no lengthy grid capacity expansion approvals required, it thoroughly resolves the critical pain points of "difficult charging, slow replenishment, and prohibitive costs" across off-grid, weak-grid, remote job sites, and temporary operating conditions.

BCH Series Product Matrix

Complete lineup of mobile and fixed BESS chargers engineered with 6,000+ cycle LFP battery storage, dual CCS2 guns, and flexible AC/DC grid integration.

Fixed Model

BCH-240-200 Fixed BESS & EV Charger (W/O AC Output)

Battery Capacity203.5 kWh (LFP)
DC Charging Power240 kW (2 × CCS2 350A)
Output VoltageDC 50 ~ 1000 V
AC Grid Input60 kW (Busbar)
Cooling / SafetyLCAC / Aerosol Fire Ext.
Dimensions / Weight1.6×1.3×2.45m / ~2,600 kg
VIEW SPECIFICATION
Mobile Model

BCH-275-200 Mobile BESS & EV Charger (with AC Output)

Battery Capacity203.5 kWh (LFP)
DC Charging Power150 kW (2 × CCS2 250A)
AC Output (Site Power)125 kW (137.5 kW Peak)
Multi-Source InputGrid (80kW) / Solar (63A) / DC In
Mobility SetupTrailer / Rapid Relocation
Dimensions / Weight2.25×1.45×1.8m / 2,750 kg
VIEW SPECIFICATION
Mobile Model

BCH-600-400 Mobile BESS & Charger (High-Power Dual Gun)

Battery Capacity407.0 kWh (LFP)
DC Charging Power400 kW (2 × CCS2 350A)
AC Output (Site Power)200 kW (270 kW Peak)
AC Input / Interface160 kW / PowerLock 250A
Control SystemEMS with 4G & OCPP 1.6
Dimensions / Weight3.95×2.25×2.25m / 8,300 kg
VIEW SPECIFICATION
Mobile Model

BCH-600-600 Mobile Liquid-Cooled Supercharging Hub

Battery Capacity610.6 kWh (LFP)
DC Charging Power600 kW (2 × CCS2 600A)
Gun Cooling SystemActive Liquid Cooling
DC Fast Input Recharge350A (DC 672~864V)
ArchitecturePure Off-Grid DC Supercharger
Dimensions / Weight~4.8×2.25×2.25m / ~11,200 kg
VIEW SPECIFICATION
Fixed Hybrid

BCH-800-600 Fixed Hybrid & EV Charger with Sockets

Battery Capacity610.6 kWh (LFP)
DC Charging Power600 kW (2 × CCS2 350A)
AC Input Capacity280 kW (PowerLock 400A)
AC Sockets Output200kW + 5× Multi-Spec CEE Sockets
Hybrid IntegrationGrid + Solar PV + Genset Sync
Dimensions / Weight4.8×2.25×2.25m / 13,200 kg
VIEW SPECIFICATION
Fixed 20'GP

BCH-500-1000 Fixed Megawatt BESS & EV Charger Station

Battery Capacity1075.0 kWh (1.075 MWh)
DC Charging Power500 kW (2 × CCS2 350A)
AC Output Power200 kW (270 kW Peak)
AC Input / Interface200 kW / PowerLock 400A
Container FormatStandard 20' GP Container
Weight / Rating19,800 kg / Heavy Industrial
VIEW SPECIFICATION

BCH Core Technical Highlights

01
DC 50~1000V Ultra-Wide Fast Charge

High-voltage platform natively compatible with 400V, 800V, and 1000V commercial vehicles, electric mining trucks, and port machinery. Dual CCS2 guns support dynamic load balancing and liquid-cooled ultra-fast charging up to 600A.

02
Solar-Diesel-Storage Multi-Energy Hub

Advanced hybrid microgrid synergy seamlessly integrating solar PV, backup diesel generators, and off-peak grid power. Intelligent power routing minimizes fuel consumption and maximizes clean solar energy capture.

03
Smart EMS & OCPP 1.6 Protocol

Proprietary microgrid EMS with millisecond-level dynamic power dispatching. Equipped with 4G/IoT connectivity, remote OTA diagnostics, and standard OCPP 1.6 for seamless integration into third-party charging platforms.

04
Industrial Safety & Fire Protection

Automotive-grade LiFePO4 cells delivering 6,000+ cycles (@90% DOD). Integrated with industrial LCAC precision thermal management, IP54 weatherproof enclosure, and CE-certified aerosol automatic fire suppression.

05
Turnkey Plug & Play Deployment

Skid-mounted or standard ISO container design with dedicated lifting points and optional mobile trailer. Deployable and ready to charge in under 60 minutes without foundation casting or transformer overhaul.

Comprehensive Application Scenarios

Empowering commercial fleet electrification with advanced Solar-Diesel-Storage-Grid hybrid microgrids across mobile job sites and permanent commercial hubs.

Mobile Fleets & Off-Grid Field Works Mobile Series

⚡ Solar-Diesel-BESS Synergy: Up to 60% fuel reduction vs. continuous generator operation.

Engineered for high mobility, remote construction, temporary operations, and areas with zero grid infrastructure (BCH-275-200, BCH-600-400, BCH-600-600).

  • ✓
    Off-Grid Construction & Earthmoving Sites

    Combines on-site solar PV arrays and intermittent diesel generator runs to charge the battery buffer. Delivers instantaneous 400kW DC fast charging for electric excavators and heavy dump trucks while providing 200kW AC power for night site lighting and power tools.

  • ✓
    Mining Pits & Zero-Emission Tunnel Excavation

    Moves flexibly alongside advancing mining faces. Eliminates harmful diesel exhaust emissions in enclosed underground tunnels by providing clean, high-voltage fast charging for electric haulers and underground utility trucks.

  • ✓
    Emergency Roadside EV Rescue & Rapid Fleet Recovery

    Trailer-mounted mobile emergency charging unit capable of rapid dispatch to recover depleted electric buses, intercity coaches, and heavy freight haulers stranded on highways or urban rings.

  • ✓
    Temporary Events, Remote Camps & Disaster Relief

    Delivers continuous, whisper-quiet microgrid power by orchestrating clean solar storage with emergency backup diesel synchronization, ensuring zero-interruption power for medical stations, mobile command centers, and event fleets.

Fixed Hubs & Multi-Energy Microgrids Fixed Series

⚡ Multi-Source Integration: Rooftop Solar PV + Grid Peak-Shaving + Multi-Socket AC Output.

Designed for permanent depots facing grid transformer bottlenecks, high peak electricity tariffs, or demanding rapid station rollout (BCH-240-200, BCH-800-600, BCH-500-1000).

  • ✓
    Grid-Constrained Logistics & Freight Depots

    Enables ultra-fast charging without waiting 12+ months for costly grid transformer upgrades. Uses rooftop solar during the day and low-cost off-peak grid power at night to replenish battery storage, discharging at full power during peak vehicle turnarounds.

  • ✓
    Ports, Container Terminals & Heavy Shunting Yards

    Ensures 24/7 continuous operation for electric terminal tractors (AGVs) and reach stackers with dual-gun 600kW fast charging and heavy-duty PowerLock power interfaces.

  • ✓
    Multi-Energy Hybrid Industrial Microgrids (BCH-800-600)

    Acts as an industrial microgrid brain: seamlessly synchronizes local solar PV, existing grid lines, and auxiliary diesel gensets, distributing up to 200kW AC power through 5 standard industrial CEE socket outlets (16A/32A/63A/125A) and PowerLock 400A.

  • ✓
    Megawatt Highway Service Stations (BCH-500-1000)

    Standard 20'GP container housing 1.075 MWh mega-storage. Delivers sustained 500kW ultra-fast charging for heavy intercity freight trucks along highway corridors with zero transformer overload.

Market Pain Points & MPMC BCH Breakthrough Value

How MPMC BCH eliminates the primary infrastructure, cost, and mobility bottlenecks in commercial vehicle electrification.

01
✕ Grid Upgrade: Long Approval & Heavy CAPEX

Applying for high-voltage grid transformer upgrades often takes 6 to 18 months with exorbitant civil and connection fees, severely delaying electric fleet deployment.

✓ Zero Expansion: Buffer Storage & Rapid Commissioning

BCH acts as a power buffer reservoir: Draws low-power steady feed (60kW~200kW) from weak grids to deliver instantaneous 150kW~600kW ultra-fast charging. Deploys in days, not years.

02
✕ Diesel Generators: Skyrocketing Fuel Cost & Emissions

Off-grid charging relying on diesel gensets incurs heavy fuel expenses, high maintenance frequency, and heavy carbon/noise emissions that breach environmental regulations.

✓ Solar-Diesel-Storage Synergy: 50%+ Fuel & LCOE Reduction

Hybrid Microgrid Optimization: Maximizes clean solar intake and runs backup diesel generators only at their optimal efficiency curve to recharge the battery buffer, slashing total energy costs by over 50%.

03
✕ High-Power Fleet Charging: Severe Grid Impact

Simultaneous high-power charging (300kW–600kW) of heavy trucks causes severe grid voltage drops, peak load penalties, and risk of transformer tripping.

✓ Grid-Friendly Peak Shaving: Buffer & Demand Optimization

BCH decouples fast charging from grid capacity: The battery pack absorbs peak charge bursts while maintaining smooth, gentle grid power intake, protecting upstream electrical assets.

04
✕ Fixed Civil Infrastructure: Stranded Asset Risk

Traditional concrete charging stations cannot be relocated when a construction project, mining phase, or temporary lease concludes, resulting in stranded capital.

✓ Modular & Mobile: 100% Asset Reusability

Turnkey skid/trailer design: Zero civil works required. Relocates seamlessly via trailer or crane truck to follow fleet operations, preserving high residual asset value across decades.

05
✕ Fragmented Site Power: Multiple Generator Sets

Remote job sites require separate equipment for EV charging, 3-phase machinery, tools, and office lighting, creating complex cabling and maintenance headaches.

✓ All-in-One Energy Hub: DC Fast Charge + Multi-Spec AC Power

Integrated DC & AC dispatch: Dual-gun DC charging (50~1000V) paired with up to 200kW AC 3-phase power output and multiple CEE industrial sockets (16A/32A/63A/125A/PowerLock).

BCH Series Showcase

High-power mobile charging in action. Watch how MPMC BCH redefines off-grid fleet management in demanding environments.

Global Success Scenarios

Global Compliance & Certification

CE Certified UN3536 IEC 61000 IEC 62477 IEC 62933-5-2 MSDS UN38.3 UL1741
```
BCH Series | MPMC Mobile & Fixed BESS Charger Hub
ALL-IN-ONE MOBILE & FIXED BESS CHARGER HUB

MPMC BCH Series BESS Charger

The MPMC BCH Series BESS Charger (Battery Energy Storage & EV Charger) is a next-generation, fully integrated, ultra-safe, and plug-and-play green energy replenishment system engineered for global electric heavy-duty trucks, construction machinery, commercial buses, and specialized utility vehicles.

The BCH Series deeply integrates 200 kWh to 1,000 kWh lithium iron phosphate (LiFePO4) energy storage systems, 150 kW to 600 kW high-power DC ultra-fast charging modules, intelligent microgrid Energy Management Systems (EMS), and industrial-grade high-reliability protective enclosures (available with mobile trailer chassis or fixed containerized formats).

Comprising two core product matrices — Mobile and Fixed/Hybrid — the BCH Series delivers key capabilities including peak shaving, high-power DC fast charging, multi-standard AC emergency power supply, and multi-energy hybridization (Grid / Diesel Genset / Solar PV). Featuring a truly plug-and-play design with zero complex civil construction and no lengthy grid capacity expansion approvals required, it thoroughly resolves the critical pain points of "difficult charging, slow replenishment, and prohibitive costs" across off-grid, weak-grid, remote job sites, and temporary operating conditions.

BCH Series Product Matrix

Complete lineup of mobile and fixed BESS chargers engineered with 6,000+ cycle LFP battery storage, dual CCS2 guns, and flexible AC/DC grid integration.

Fixed Model

BCH-240-200
Fixed BESS & EV Charger

Battery Capacity203.5 kWh (LFP)
DC Charging Power240 kW (2 × CCS2 350A)
Output VoltageDC 50 ~ 1000 V
AC Grid Input60 kW (Busbar)
Cooling / SafetyLCAC / Aerosol Fire Ext.
Dimensions / Weight1.6×1.3×2.45m / ~2,600 kg
VIEW SPECIFICATION
Mobile Model

BCH-275-200
Mobile BESS & EV Charger (with AC Output)

Battery Capacity203.5 kWh (LFP)
DC Charging Power150 kW (2 × CCS2 250A)
AC Output (Site Power)125 kW (137.5 kW Peak)
Multi-Source InputGrid (80kW) / Solar (63A) / DC In
Mobility SetupTrailer / Rapid Relocation
Dimensions / Weight2.25×1.45×1.8m / 2,750 kg
VIEW SPECIFICATION
Mobile Model

BCH-600-400
Mobile BESS & EV Charger (High Power)

Battery Capacity407.0 kWh (LFP)
DC Charging Power400 kW (2 × CCS2 350A)
AC Output (Site Power)200 kW (270 kW Peak)
AC Input / Interface160 kW / PowerLock 250A
Control SystemEMS with 4G & OCPP 1.6
Dimensions / Weight3.95×2.25×2.25m / 8,300 kg
VIEW SPECIFICATION
Mobile Model

BCH-600-600
Mobile Liquid-Cooled Supercharger

Battery Capacity610.6 kWh (LFP)
DC Charging Power600 kW (2 × CCS2 600A)
Gun Cooling SystemActive Liquid Cooling
DC Fast Input Recharge350A (DC 672~864V)
ArchitecturePure DC Mobile Supercharging Hub
Dimensions / Weight~4.8×2.25×2.25m / ~11,200 kg
VIEW SPECIFICATION
Fixed Hybrid

BCH-800-600
Fixed Hybrid & EV Charger with Sockets

Battery Capacity610.6 kWh (LFP)
DC Charging Power600 kW (2 × CCS2 350A)
AC Input Capacity280 kW (PowerLock 400A)
AC Sockets Output200kW + 5× Multi-Spec CEE Sockets
Hybrid IntegrationGrid + Solar PV + Genset Sync
Dimensions / Weight4.8×2.25×2.25m / 13,200 kg
VIEW SPECIFICATION
Fixed 20'GP

BCH-500-1000
Fixed Megawatt BESS & EV Charger Station

Battery Capacity1075.0 kWh (1.075 MWh)
DC Charging Power500 kW (2 × CCS2 350A)
AC Output Power200 kW (270 kW Peak)
AC Input / Interface200 kW / PowerLock 400A
Container FormatStandard 20' GP Container
Weight / Rating19,800 kg / Heavy Industrial
VIEW SPECIFICATION

BCH Core Technical Highlights

01
DC 50~1000V Ultra-Wide Fast Charge

High-voltage platform natively compatible with 400V, 800V, and 1000V heavy commercial vehicles, electric mining trucks, and port machinery. Dual CCS2 guns support dynamic load balancing and liquid-cooled ultra-fast charging up to 600A.

02
Multi-Source Hybrid Microgrid

Flexible power input supporting weak grid, on-site solar PV, diesel generator pairing, and DC socket fast replenishment. Stores energy during off-peak windows and discharges during peak hours to eliminate demand charges.

03
Smart EMS & OCPP 1.6 Protocol

Proprietary microgrid EMS with millisecond-level dynamic power dispatching. Equipped with 4G/IoT connectivity, remote OTA diagnostics, and standard OCPP 1.6 for seamless integration into third-party charging and fleet management platforms.

04
Industrial Safety & Fire Protection

Automotive-grade LiFePO4 cells delivering 6,000+ cycles (@90% DOD). Integrated with industrial LCAC precision thermal management, IP54 weatherproof enclosure, and CE-certified aerosol automatic fire suppression.

05
Turnkey Plug & Play Deployment

Skid-mounted or standard ISO container design with dedicated lifting points and optional mobile trailer. Deployable and ready to charge in under 60 minutes without foundation casting or transformer overhaul.

Comprehensive Application Scenarios

Engineered to deliver reliable, high-power energy replenishment wherever vehicles operate — from mobile off-grid field sites to permanent commercial microgrids.

Mobile Fleet & Off-Grid Scenarios Mobile Series

Targeted at high-mobility operations, temporary construction projects, and zero-grid field environments (Models: BCH-275-200, BCH-600-400, BCH-600-600).

  • ✓
    Construction Sites & Heavy Earthmoving

    Delivers on-site DC fast charging for electric excavators, wheel loaders, and heavy dump trucks before grid connection is established, while supplying AC power for night lighting and power tools.

  • ✓
    Mining Pits & Tunneling Operations

    Relocates flexibly as mining excavation advances. Provides high-voltage fast replenishment for heavy haul trucks in zero-emission underground or remote opencast mines.

  • ✓
    Emergency Roadside Rescue & Mobile Charging

    Rapid-response mobile EV recovery for commercial bus fleets and long-haul logistics trucks stranded with low state of charge on highways or urban corridors.

  • ✓
    Temporary Events, Film Production & Field Camps

    Delivers clean, whisper-quiet electricity and vehicle charging with zero exhaust fumes, replacing polluting diesel generators at festivals and temporary camps.

Fixed Hub & Commercial Microgrids Fixed Series

Targeted at permanent depots facing grid capacity constraints, high peak electricity tariffs, or requiring fast station rollout (Models: BCH-240-200, BCH-800-600, BCH-500-1000).

  • ✓
    Grid-Constrained Logistics & Truck Depots

    Enables high-power dual-gun fleet charging without waiting 12+ months for costly grid transformer upgrades, leveraging valley-tariff charging and peak-demand discharge.

  • ✓
    Ports, Terminals & Heavy Shunting Hubs

    Continuous 24/7 turnaround for electric terminal tractors and container reach stackers with high-current CCS2 dual-gun charging and industrial multi-socket power feeds.

  • ✓
    Multi-Energy Hybrid Industrial Hubs

    BCH-800-600 combines on-site rooftop solar PV, backup generators, and BESS storage, distributing 200kW AC power via PowerLock and multi-spec industrial CEE sockets.

  • ✓
    Megawatt Highway Service Hubs (BCH-500-1000)

    Standard 20'GP containerized 1.075 MWh mega-storage station delivering sustained 500kW ultra-fast charging along major highway freight corridors and transit stations.

Market Pain Points & MPMC BCH Breakthrough Value

How MPMC BCH eliminates the primary infrastructure, cost, and mobility bottlenecks in commercial vehicle electrification.

01
✕ Grid Upgrade: Long Approval & Heavy CAPEX

Applying for high-voltage grid transformer upgrades often takes 6 to 18 months with exorbitant civil and connection fees, severely delaying electric fleet deployment.

✓ Zero Expansion: Buffer Storage & Rapid Commissioning

BCH acts as a power buffer reservoir: Draws low-power steady feed (60kW~200kW) from weak grids to deliver instantaneous 150kW~600kW ultra-fast charging. Deploys in days, not years.

02
✕ Diesel Generators: Skyrocketing Fuel Cost & Emissions

Off-grid charging relying on diesel gensets incurs heavy fuel expenses, high maintenance frequency, and heavy carbon/noise emissions that breach environmental regulations.

✓ Zero-Emission LFP Power: 50%+ LCOE Reduction

100% clean electric power: Zero emissions and whisper-quiet operation. Charging via off-peak electricity or on-site solar reduces levelized cost of energy (LCOE) by over 50% compared to diesel fuel.

03
✕ High-Power Fleet Charging: Severe Grid Impact

Simultaneous high-power charging (300kW–600kW) of heavy trucks causes severe grid voltage drops, peak load penalties, and risk of transformer tripping.

✓ Grid-Friendly Shaving: Peak Shaving & Demand Optimization

BCH decouples fast charging from grid capacity: The battery pack absorbs peak charge bursts while maintaining smooth, gentle grid power intake, protecting upstream electrical assets.

04
✕ Fixed Civil Infrastructure: Stranded Asset Risk

Traditional concrete charging stations cannot be relocated when a construction project, mining phase, or temporary lease concludes, resulting in stranded capital.

✓ Modular & Mobile: 100% Asset Reusability

Turnkey skid/trailer design: Zero civil works required. Relocates seamlessly via trailer or crane truck to follow fleet operations, preserving high residual asset value across decades.

05
✕ Fragmented Site Power: Multiple Generator Sets

Remote job sites require separate equipment for EV charging, 3-phase machinery, tools, and office lighting, creating complex cabling and maintenance headaches.

✓ All-in-One Energy Hub: DC Fast Charge + Multi-Spec AC Power

Integrated DC & AC dispatch: Dual-gun DC charging (50~1000V) paired with up to 200kW AC 3-phase power output and multiple CEE industrial sockets (16A/32A/63A/125A/PowerLock).

BCH Series Showcase

High-power mobile charging in action. Watch how MPMC BCH redefines off-grid fleet management in demanding environments.

Global Success Scenarios

Global Compliance & Certification

CE Certified UN3536 IEC 61000 IEC 62477 IEC 62933-5-2 MSDS UN38.3 UL1741
BCH Series | MPMC Premium Mobile BESS Charger
Mobile High-Power DC Charging Hub

BCH Series Mobile BESS Charger

The BCH Series Mobile BESS Charger integrates 70kWh–1000kWh lithium iron phosphate energy storage systems, DC fast charging modules, intelligent EMS energy management systems and mobile chassis into a single all-in-one mobile energy replenishment unit.
Featuring an integrated overall design, the BCH Series Mobile BESS Charger is plug-and-play, requires no civil construction and supports rapid relocation. The BCH Series Mobile BESS Charger comes with three core functions: energy storage, DC fast charging and emergency backup power supply.
The BCH Series Mobile BESS Charger perfectly resolves power replenishment difficulties for electric equipment under off-grid, weak-grid and temporary working conditions, acting as an eco-friendly replacement for high-pollution diesel generators. The BCH Series Mobile BESS Charger covers comprehensive charging scenarios including commercial vehicles, construction machinery, port heavy trucks, construction site equipment, emergency rescue and mobile charging stations.

BCH Mobile BESS Charger Models

BCH-80-70 Mobile BESS Charger


BCH-80-70 
Mobile BESS Charger

Charging Power80 kW
Battery Capacity70.6 kWh
CoolingLiquid Cooled
ProtectionIP54 / C4
DETAILS
BCH-275kW-200kWh Mobile BESS Charger


BCH-275kW-200kWh Mobile BESS Charger 
DC & AC Sides

Charging Power275 kW
Battery Capacity203 kWh
MobilityTrailer-mounted
SystemIntegrated 3S
DETAILS
BCH-600kW-400kWh Mobile BESS Charger


BCH-600kW-400kWh 
Mobile BESS Charger

Charging Power600 kW
Battery Capacity407 kWh
CoolingActive Liquid
RateHigh-rate Charge
DETAILS
BCH-600kW-600kWh Mobile BESS Charger


BCH-600kW-600kWh 
Mobile BESS Charger

Charging Power600 kW
Battery Capacity610.6 kWh
CoolingActive Liquid
Dual GunCCS2 600A
DETAILS
BCH 800kW-600kWh Fixed Hybrid & EV BESS Charger


BCH 800kW-600kWh Fixed Hybrid & EV BESS Charger

Charging Power800 kW
Battery Capacity610 kWh
ContainerHeavy-duty Skid
ProtectionIP54 / C4
DETAILS
BCH-500kW-1000kWh Fixed Hybrid & EV BESS Charger


BCH-500kW-1000kWh Fixed Hybrid & EV BESS Charger

Charging Power500 kW
Battery Capacity1075 kWh
Format20' GP Container
ApplicationMining/Haulage
DETAILS

Operational Competencies

Modular Expansion

Scalable architecture to support fleet growth from small vehicles to heavy mining excavators.

Instant Peak Power

Buffer storage delivers high-power bursts for simultaneous fast charging without grid overload.

Rapid Deployment

Plug-and-play mobile design requires zero site infrastructure. Deploy and charge in under 60 mins.

Multi-Energy Hub

Synchronize with grid, solar PV, and diesel power to minimize charging energy costs.

Extreme Durability

Advanced liquid cooling and IP54 dustproof casing for reliable use in mining and construction.

BCH CORE COMPETENCIES

01
Zero Civil Works Deployment

Fully integrated unit with lifting points and optional trailer. Plug-and-play setup with no need for concrete foundations, cabling, or grid expansion. Deploy and re-mobilize across sites in under 1 hour.

02
Industrial-Grade Safety

IP54 enclosure with IP67 battery packs. Featuring liquid cooling, aerosol fire suppression, and multi-layer protection (over-voltage, surge, E-stop). 6,000+ cycle life with C4/C5 anti-corrosion for harsh mining/port environments.

03
Smart Multi-Mode Charging

10-inch touchscreen supporting RFID, QR code, and App-based billing. Real-time 4G/WiFi cloud monitoring and automatic power allocation. Compatible with GB/T, CCS2 for all commercial heavy EVs.

04
Bidirectional Energy Dispatch

Supports both AC grid and DC solar input. Charge during off-peak hours and discharge during peak demand to maximize ROI. Silent operation and zero emissions meet strict environmental regulations.

05
Modular Customization

Power options from 80kW to 800kW DC fast charge with 70kWh to 1000kWh storage capacity. Supports parallel expansion to meet load demands from emergency rescue to large-scale terminal clusters.

BCH Series Showcase

High-power mobile charging in action. Watch how MPMC BCH redefines off-grid fleet management in demanding environments.

Global Success Scenarios

Global Compliance & Certification

CE Certified UN3536 IEC 61000 IEC 62477 IEC 62933-5-2 MSDS UN38.3 UL1741
INTELLIGENT BESS SOLUTIONS

HBD-A All-in-One C&I Energy Storage

Empower your business with the future of energy management. The MPMC HBD-A Series is an all-in-one, liquid-cooled energy storage solution designed exclusively for the global commercial and industrial (C&I) sectors. By integrating top-tier LFP batteries, high-efficiency PCS, and intelligent EMS into a modular prefabricated unit, we deliver a plug-and-play system that is factory-tested and ready for rapid deployment.

Core Values:
Ultimate Cost Efficiency: Achieve significant energy savings through intelligent peak shaving, load shifting, and power arbitrage. Reduce high demand charges and maximize the ROI of your on-site PV systems.
Uninterrupted Reliability: Ensure 24/7 business continuity with millisecond-level seamless switching between grid-tied and off-grid modes, protecting critical production lines and data centers from grid outages.
Superior Lifespan: Our advanced full-liquid cooling thermal management maintains constant cell temperatures, ensuring low capacity attenuation and a cycle life exceeding 8,000 times.
Full-Scenario Flexibility: A modular, scalable design perfectly suited for manufacturing plants, industrial parks, EV charging hubs, commercial buildings, and remote microgrids.

From cost reduction to ESG compliance, the HBD-A Series provides a safe, smart, and sustainable energy foundation for every enterprise.

BESS HBD-A CORE LINEUP

MPMC HBD-125kW-260kWh Battery Energy Storage System

HBD-125kW-260kWh
Battery Energy Storage System

Rated Power125 kW
Energy Capacity261.2 kWh
CoolingLiquid
ProtectionIP55
VIEW PRODUCT
MPMC HBD-540kW-400kWh Fixed Hybrid BESS

HBD-540kW-400kWh
Battery Energy Storage System

Rated Power540 kW
Energy Capacity407.0 kWh
CoolingLiquid
ProtectionIP65
VIEW PRODUCT
MPMC HBD-250kW-1000kWh Battery Energy Storage System

HBD-250kW-1000kWh
Battery Energy Storage System

Rated Power250 kW
Energy Capacity1045 kWh
CoolingLiquid
ProtectionIP54
VIEW PRODUCT
MPMC HBD-500kW-1000kWh Battery Energy Storage System

HBD-500kW-1000kWh
Battery Energy Storage System

Rated Power500 kW
Energy Capacity1003.5 kWh
CoolingLiquid
ProtectionIP54
VIEW PRODUCT

BESS SYSTEM COMPOSITION

01
Battery PACK

High-safety LFP with active-balanced BMS.

02
PCS Unit

Bi-directional conversion & switching.

03
Smart EMS

Integrated management strategies.

04
Thermal Control

Active liquid cooling system.

05
Fire Security

Multi-layer automatic suppression.

06
Cloud Platform

Remote logging & fault alarms.

PROVEN WORLDWIDE · REAL-WORLD DEPLOYMENTS

Global Application Projects

From industrial peak shaving and EV fleet hubs to remote mining microgrids and generator-hybrid systems, explore how MPMC liquid-cooled energy storage systems deliver reliable, high-yield energy management worldwide.

MPMC Liquid Cooled BESS in Australia Mining Site 🇦🇺 Australia Mining Microgrid

Mining Camp & Microgrid Stabilization

Delivers continuous off-grid power, cuts generator fuel consumption, and stabilizes harsh heavy-equipment impact loads.

Diesel-Storage Hybrid 24/7 Resilience
MPMC C&I Energy Storage in UK Commercial EV Station 🇬🇧 United Kingdom EV Fleet Charging

Commercial EV Fast-Charging Buffer

Buffers high-power DC fast-charging bursts without costly transformer upgrades or grid expansion fees.

Demand Shaving Zero Grid Expansion
MPMC Liquid Cooled ESS in France Industrial Park 🇫🇷 France Industrial Park

Industrial Park Dynamic Tariff Arbitrage

Charges on low off-peak power tariffs and discharges during manufacturing peak hours to maximize energy savings.

Peak-Valley Arbitrage EMS Cloud Sync
MPMC Container BESS in Hungary Logistics Hub 🇭🇺 Hungary Logistics & Solar

Logistics Park Solar-Storage Integration

Stores surplus rooftop solar power to supply automated sorting lines and logistics EV fleets round-the-clock.

100% PV Self-Use High Energy Density
MPMC Outdoor Energy Storage System in Chile Extraction Project 🇨🇱 Chile Heavy Industry

Harsh Environment Hybrid Off-Grid Power

High-protection liquid-cooled design withstands desert dust and temperature extremes for critical drilling operations.

Extreme Climates Heavy Load Support
MPMC Multi-Container Energy Storage in New Zealand 🇳🇿 New Zealand Grid Support

Grid Frequency Regulation & Backup Station

Delivers millisecond-level response for regional grid frequency stability and reliable emergency reserve.

Primary Frequency Grid Resilience
MPMC BESS and Genset Hybrid Energy System in Thailand 🇹🇭 Thailand BESS + Genset Hybrid

Genset-Storage Hybrid Power System

Coordinates battery storage with diesel generators to optimize engine loading, eliminate low-load running, and cut fuel costs.

Fuel Optimization Low-Load Prevention
MPMC Smart Factory Energy Storage in Germany 🇩🇪 Germany Smart Factory

Precision Manufacturing UPS Backup Power

Guarantees zero-second uninterrupted transition to protect sensitive robotic production lines from voltage dips.

UPS-Grade Transfer Production Continuity

Global Success Scenarios

MPMC HBD-A Series Battery Energy Storage Systems deployed across utility grids, heavy-duty mining, logistics hubs, and industrial microgrids worldwide.

🇬🇧 United Kingdom Logistics Fleet & EV Hub
Logistics Fleet & EV Hub
Heavy truck fast charging & depot peak demand shaving.
🇨🇱 Chile Mining Hybrid Microgrid
Mining Hybrid Microgrid
Off-grid drilling power & heavy-duty fuel replacement.
🇦🇺 Australia Grid-Tied Substation
Grid-Tied Substation
Utility buffer, frequency support & energy arbitrage.
🇫🇷 France Commercial & Industrial UPS
Commercial & Industrial UPS
Factory demand control & critical load backup continuity.
🇭🇺 Hungary Industrial Park Microgrid
Industrial Park Microgrid
Multi-unit parallel scaling & solar-plus-storage integration.
🇳🇿 New Zealand Renewable Power Station
Renewable Power Station
Centralized multi-megawatt solar & grid stabilization.
🇹🇭 Thailand Commercial PV Storage
Commercial PV Storage
Rooftop solar self-consumption & peak-valley tariff optimization.
🌍 Global Delivery Factory Prefabricated BESS
Factory Prefabricated BESS
100% pre-commissioned plug-and-play rapid overseas rollout.
Global Presence & Manufacturing Strength

Who We Are

Global Leader in Distributed Hybrid Solutions and Off-Grid Systems

Shanghai Headquarters
Shanghai, China
MPMC POWERTECH CORP.

Shanghai Headquarters

✓ Global Strategy & Executive HQ
✓ R&D & International Sales Hub
Haimen Manufacturing Center
Jiangsu, China
MPMC POWERTECH JIANGSU CO., LTD.

Haimen Manufacturing Center

✓ Generator Set & Power Equipments
✓ Hybrid & Distributed Power Base
Yangzhong Manufacturing Center
Jiangsu, China
MPMC ENERGY TECH CO., LTD.

Yangzhong Manufacturing Center

✓ Clean Energy & Storage Technology
✓ High Precision Manufacturing
FuJian Manufacturing Center
Fujian, China
AGEN POWERCLUB CORP.

FuJian Manufacturing Center

✓ Generator Set & Power Equipments
✓ Intelligent Assembly & Export Base
4
HQ & Manufacturing Bases
12,000+
Annual Sets Production Capacity
59+
Product Portfolio Types
120+
Export Countries & Regions
MPMC Energy Storage Hub - Category Page

MPMC ENERGY STORAGE ECOSYSTEM

Battery Energy Storage
for Every Power Challenge.

MPMC commercial and industrial battery energy storage systems, mobile BESS chargers and deployable solar containers deliver reliable power for grid-connected, off-grid and hybrid energy projects.

5specialist
series
10 kW–1 MWpower
coverage
7.65–5,015kWp / kWh
platform range
MPMC HBD-A liquid cooled battery energy storage system
MPMC HBD-A Liquid-Cooled C&I BESS 500 kW / 1,003.5 kWh shown

MPMC GLOBAL LEADER IN DISTRIBUTED HYBRID SOLUTIONS & OFF-GRID SYSTEMS

MPMC - GLOBAL LEADER IN DISTRIBUTED HYBRID SOLUTIONS & OFF-GRID SYSTEMS

Every MPMC series is engineered to work as a standalone solution or as part of an integrated system. Store energy when it costs less, replace generator runtime, charge electric fleets where the grid cannot reach, and add portable solar generation wherever it is needed.

ENERGY PATHWAY

Connect the source, storage and load.

MPMC creates a controllable energy layer between variable supply and critical demand.

OPERATING MODES

Grid-connected, off-grid or hybrid—one system architecture.

MPMC EMS coordinates generation, storage and load priorities according to the availability and cost of each energy source.

01

GRID-CONNECTED

Lower the cost of every kWh.

Grid
→
BESS
→
Load

Charge during low-tariff periods or from surplus PV, then discharge during peak demand. The BESS reduces demand charges, buffers EV charging loads and improves on-site solar utilization.

  • Typical configuration: HBD-A / HBD-E + Grid + Rooftop PV
  • Best for: factories, offices, retail, cold chain and EV hubs
  • Key outcomes: peak shaving · tariff arbitrage · backup readiness
02

OFF-GRID

Independent power where the grid ends.

SPK® PV
→
BESS
→
Load

Use deployable solar as the primary energy source and battery storage as the stability layer. The system supplies silent power day and night for remote operations, islands and temporary sites.

  • Typical configuration: SPK® + HBD-A / HBD-R / HBD-E
  • Best for: islands, remote camps, oil fields and disaster relief
  • Key outcomes: renewable supply · silent operation · reduced fuel logistics
03

HYBRID MICROGRID

Use every energy source more intelligently.

PV + Grid + Genset
→
EMS / BESS
→
Critical Load

MPMC EMS continuously balances solar, battery, grid and diesel power. Batteries absorb fast load changes, while generators run in their efficient operating zone or remain off when not required.

  • Typical configuration: HBD-A / HBD-R + SPK® + Diesel Genset
  • Best for: mining, construction, ports and critical infrastructure
  • Key outcomes: fuel optimization · resilient backup · scalable capacity

COMMERCIAL & INDUSTRIAL ENERGY STORAGE PORTFOLIO

Five battery energy storage and mobile power series. One complete energy strategy.

Choose the right commercial BESS, mobile energy storage system, BESS charger or mobile solar container by operating condition, mobility requirement and desired energy outcome.

01 MPMC HBD-A liquid cooled commercial and industrial battery energy storage system family

STATIONARY COMMERCIAL & INDUSTRIAL STORAGE

HBD-A All-in-One C&I Energy Storage

A liquid-cooled, factory-integrated BESS platform for demand management, backup power, solar self-consumption, public-grid support and scalable small-to-utility energy storage stations.

125 kW–1,000 kWAC rated power
261.2–5,015 kWhenergy capacity
Liquid cooledthermal management

Built for: factories · industrial parks · charging hubs · data centers · public grid support · small energy storage stations · islanded microgrids

View HBD-A Series →

ENGINEERED FOR HIGH-VALUE C&I POWER

Liquid CoolingActive thermal management for stable cell temperatures and extended operating life.
Grid & Island ModesBi-directional PCS and EMS support grid-connected, backup and microgrid operation.
Integrated SafetyLFP battery platform with active-balanced BMS and multi-layer fire protection.
Scalable ArchitectureFrom commercial sites to public-grid support and small energy storage stations.
02 MPMC HBD-R mobile battery energy storage system family for hybrid power

MOBILE POWER & HYBRID STORAGE

HBD-R Mobile Battery Energy Storage

A rapidly deployable BESS range for rental fleets, construction, events and hybrid diesel applications where power has to move with the project.

30 kW–610 kWrated power
61.4–614.4 kWhenergy capacity
Trailer / skidmobile format

Built for: construction · rental · outdoor events · oil & gas · temporary utility support

View HBD-R Series →

BUILT FOR MOBILE AND HARSH-SITE POWER

Fast DeploymentTrailer or skid design supports rapid transfer by truck or forklift for temporary power projects.
Hybrid Genset ReadyWorks alongside diesel generators to reduce low-load running, noise and fuel consumption.
Wide Temperature OperationDesigned for demanding outdoor use from -20°C to 55°C, subject to selected configuration.
Outdoor ProtectionIP54 / IP55 protection helps withstand dust, rain and open-site working conditions.
03 MPMC HBD-E small commercial battery energy storage system family

COMPACT SMALL C&I STORAGE

HBD-E Small C&I Battery Energy Storage

Compact, PV-ready storage with integrated battery, PCS and EMS for SMEs, commercial facilities, charging hubs and premium residential sites.

10 kW–125 kWrated power
30.7–261.2 kWhenergy capacity
IP54protected enclosure

Built for: SMEs · supermarkets · offices · villas · smart EV charging hubs

View HBD-E Series →

COMPACT STORAGE, COMPLETE CONTROL

Integrated 3S DesignBattery management, energy management and power conversion are combined in one compact system.
PV-Ready ConnectionNative solar integration supports higher on-site renewable self-consumption.
High Energy EfficiencyDesigned for efficient daily cycling, peak demand management and backup readiness.
Remote MonitoringLocal screen and 4G / WiFi cloud platform support lifecycle visibility and fault alerts.
04 MPMC BCH mobile battery energy storage charger family for heavy electric vehicles

HIGH-POWER MOBILE CHARGING

BCH Mobile BESS Charger

A self-contained charging and storage platform that delivers high-rate DC charging without permanent grid expansion or civil works.

80 kW–800 kWcharging power
70.6–1,075 kWhbattery options*
AC + DC inputmulti-energy charging

Built for: electric machinery · logistics fleets · ports · mining · emergency rescue

View BCH Series →

HIGH-POWER CHARGING WITHOUT GRID EXPANSION

Battery Load BufferDelivers high-power DC charging bursts while reducing transformer and grid overload risk.
Multi-Source ChargingSynchronizes with AC grid, solar PV and diesel power to optimize charging energy costs.
Harsh Environment ReadyLiquid cooling, protected battery packs and IP54 enclosure support demanding site conditions.
Smart Charge ManagementCloud monitoring, access control and automatic power allocation support fleet operations.
05 MPMC SPK mobile solar power container family for off-grid solar microgrids

DEPLOYABLE SOLAR GENERATION

SPK® Mobile Solar Container

A containerized, fold-out solar array that travels like equipment and deploys like a power plant—ideal renewable input for storage, charging and remote microgrids.

7.65–231.84 kWparray power
HJT / bifacialPV module choices
Fold-out arraycontainerized deployment

Built for: remote sites · islands · disaster relief · oil fields · infrastructure projects

View SPK® Series →

RENEWABLE INPUT THAT TRAVELS WITH THE PROJECT

Rapid Solar DeploymentFold-out frames, rails and electrical equipment are integrated into a transport-ready container.
HJT / Bifacial OptionsPV module selection can be matched to site conditions and project configuration.
Modular ExpansionCombine multiple mobile solar containers with BESS for scalable off-grid power.
Reduced Diesel DependenceSupply renewable energy to hybrid microgrids and reduce fuel logistics at remote sites.

INTEGRATED CONFIGURATIONS

Combine systems to unlock more value.

01

SPK® + HBD-A / HBD-E

Solar-storage independence

Use deployable solar to charge BESS, increase renewable self-consumption and protect operations from grid volatility.

02

HBD-R + Diesel Genset

Lower-fuel hybrid power

Optimize genset loading, cut idle time and provide quiet, instant battery power at temporary job sites.

03

BCH + SPK® / Grid / Diesel

Mobile fleet electrification

Deploy high-power charging where the grid is constrained and charge from the most cost-effective available source.

APPLICATIONS

Built for the places where power cannot fail.

01Industrial & Manufacturing
02Electric Fleet & Logistics
03Mining, Ports & Oil Fields
04Construction & Rental
05Remote Microgrids & Islands
06Data Centers & Critical Backup

ENGINEERED AROUND YOUR LOAD PROFILE

Specify the right system before you invest.

Send MPMC your site load, operating hours, energy source, charging demand and location. Our engineering team will configure a scalable storage, charging or solar-storage solution.

Who We Are

Global Leader in Distributed Hybrid Solutions and Off-Grid Systems
Clean Energy Solutions | Hybrid Power Solutions | Microgrid Solutions | Traditional Power Solutions